| AC to DC Power Conversion |
|
|
|
Complete Guidelines for Designing Flyback Converters Using Variable Off-Time Controller HFC0300 |
|
Flyback Converter Optimized for Operation under Peak Load within Short Time Period (Using HFC0300) |
|
Complete Guidelines for Designing Flyback Converter Using Fixed-Frequency Current Mode Controller HFC0400 |
|
Complete Guidelines for Designing Universal-Input LLC Resonant Controller Using HR1000A (90W Adaptor Used for Example) |
|
Complete Guidelines for Designing Universal-Input Boundary-Conduction Mode Boost PFC Using MP44010 |
|
Flyback Converter Design Made Easy Using the Primary-Side Regulator_MP020-5 |
|
Complete Guidelines for Designing Flyback and Buck Converters with 900V Switching Regulator MP110/HF900 |
|
Design Guidelines for Buck Regulator Using MP15x |
|
Using Synchronous Rectification Controller in Flyback Converter Design - using MP6902 |
| Class-D Audio |
|
MP1720 2.7W Mono Class D Low-EMI High-Efficiency Audio Amplifier |
| DC-DC Power Conversion |
|
Input Capacitor Selection Guide for MP2130 |
|
PCB Layout Design Guidelines for MP2932 and MP86884 |
|
PCB Layout Design Guidelines for MPQ8632 and MPQ8636 Families |
|
Advanced Asynchronous Modulation |
|
PCB Layout Design Guidelines for NB67x Series |
|
5A, 36V Synchronous Buck Converter in a 3x4mm Package Application Note |
|
Selecting a Boost Regulator and Its Inductor |
|
MP5416 Optimizing Output Voltage Selection |
|
MP5515 Capacitor Health Measurement |
| Display Blacklighting Power |
|
High Frequency True PWM Dimming White LED Driver MP3304 and MP3305 |
|
Real LIPS Pure 2-stage CCCV Mode LED Driver |
| LED Lighting & Illumination |
|
Boundary Mode Offline LED Driver Using MP4000 |
|
MP4020 Primary-Side Control, TRIAC-Dimmable, Offline LED Controller Application Note |
|
Primary-Side Control with Active PFC Offline LED Controller Application Note |
|
Application Note for a TRIAC-Dimmable, Offline LED Controller with Primary-Side Control and Active PFC |
|
Application Note for a TRIAC-Dimmable, Offline LED Controller with Primary-Side Control and Active PFC |
|
Application Note for a High Performance, Offline LED Controller with Primary-Side Control and Active PFC |
| E-Fuse & Load Switches |
|
Hot Swap Device MP5022A |
| Motor Drivers & Sensors |
AN152 |
Driving Solenoids with The MPQ6610 |
|
Replacing the Si9979 with the MP6532 |
|
Using the MP6530 Family of Pre-Drivers |
|
Understanding MP6500 Current Control |
|
Input Capacitor and Over Voltage Protection Circuit Design |
|
Brushless DC Motor Fundamentals |
| Motor Driver Family |
Motor Driver PCB Layout Guidelines |
| MagAlpha Sensor Family |
Linearity in Side-shaft Configuration |
| MagAlpha Sensor Family |
Using MagAlpha Device to Sense BLDC Rotor Position |
|
Using MagAlpha in Off-Axis Mounting |
|
Using MagAlpha Devices to WordStr Optical Encoders |
|
The Right Magnet for the MagAlpha at the End of the Shaft |
| MagAlpha Sensor Family |
MA102/MA3XX Rotor Direct Angle Sensing with a MagAlpha |
| MagAlpha Sensor Family |
Using the MagAlpha Serial Interface Advanced Features |
| Generic |
|
Designing a Stable COT Converter with Desired Load and Line Regulation |
|
Rework Process for TQFN Packages |
|
Measuring Efficiency for AC-DC Power Supplies: Active Mode and No-Load Mode |
|
The Method of Reducing No-load Power Consumption of Flyback Converters |
| Generic |
COT Buck Loop Bandwidth and Load Step Response Comparison |
Log in to your account
Create New Account